miércoles, 1 de agosto de 2012

iPad By Davis

iPad By Davis


Review: On-Lap 1302, a portable second display for laptops

Posted: 01 Aug 2012 04:30 AM PDT

Review: On-Lap 1302, a portable second display for laptops Though the On-Lap 1302 display itself is rather ho-hum, you can have a two display setup wherever you go, even if you're working out of your local library or coffee shop.

FreedomPop announces the Freedom Sleeve WiMax iPod touch case with included data allowance

Posted: 01 Aug 2012 02:48 AM PDT

FreedomPop announces the Freedom Sleeve WiMax iPod touch case with included data allowanceFreedomPop has announced that it will soon offer the Freedom Sleeve which is an iPod touch case that includes a WiMax mobile hotspot. The idea is to enable iPod touch users to have continuous access to a data connection and be able to make and receive phone calls through VoIP services like Skype. It looks to offer the younger generation a way to have a connected device without the need for a hefty call and data phone plan.

Turn your iPod Touch into an iPhone with the FreedomPop Sleeve: 4G data for your iPod Touch, Wi-Fi hotspot for up to 8 other devices, stream video and music anywhere, and you can even use Apple's FaceTime wherever you go!

The Freedom Sleeve only runs on Sprint's WiMax network so is only suitable for areas where there is WiMax coverage. FreedomPop does have plans to launch another version in the future which will run on Sprint's LTE network. When it comes down to pricing, this is where it all gets very interesting. The Freedom Sleeve for iPod touch will cost an initial $99.00. Once you have paid that upfront cost, you then get 500 MB a month of data free of charge. If you blow through that, you can then get additional data for $10 a GB. There is no contract and no commitment so the whole thing can be cancelled at any time.

The FreedomPop Freedom Sleeve may be a great option for younger children who probably don't need a full cell phone plan. It would be really handy to be able to contact them when needed plus give them access to all of their iPod touch's features when away from a WiFi network.

Would you consider a case like this for the iPod touch? Could you see it saving money on a cell phone plan for younger family members?

Source: FreedomPop via TechCrunch



Poll: How many of your friends and family use iMessage?

Posted: 31 Jul 2012 09:39 PM PDT

Apple shocked a lot of us back in 2010 when they announced iMessage, probably none more than the carriers who for years changed an absolutely obscene amount of money to send short text messages to and fro. When Apple made iMessage free (except for the data change, if you were on cellular) that carrier gouging was put to an end -- presuming everyone you texted used iOS. But is that the case? Do enough of your friends, family, colleagues, and contacts use iMessage to really put the kibosh on SMS?

For me it's still a very mixed bag. Some of my friends use iPhones, so iMessage is easy. Many of my family and the people I work with still don't even use smartphones, let alone iPhones, so iMessage is a non-starter. Also, with the just-released OS X Mountain Lion, Apple has brought iMessage back to the Mac, and you can quickly send and receive texts, pictures, locations, and contacts right on your computer. It's really fast, but it's also messy. Right now my iPhone, iPad, and MacBook Air are all in a constant race to see which can beep and buzz first and most often.

iOS 6 promises to make some things better, letting us combine our phone numbers and Apple IDs, so at least we won't have to wonder which message is going to which device any more.

But that still leaves us stuck on the old SMS system for all our Windows, Android, BlackBerry, and other non-iOS or OS X using friends and family, with no real future in sight. (Because the odds of Apple creating iMessage clients for those platforms are about the same as the odds of them putting a keyboard and kickstand on the next iPhone...)

So given all that, when you're typing away on Messages all day, are most of the ones you send and receive good old iMessage blue, or cold hard carrier cash green? Do most of the people you text with have iMessage, or do most of them not? Hit the poll up top and then give me the details in the comments below!



How to set up Outlook.com email on your iPhone or iPad

Posted: 31 Jul 2012 07:54 PM PDT

How to set up Outlook.com email on your iPhone or iPad

Microsoft has released Outlook.com, what they consider to be the next-generation of email. And much to their credit, Microsoft have gone above and beyond to make sure you can access it not only on the web, but from any and all of your devices, including the iPhone, iPod touch, and iPad.

Here's how.

How to access Outlook.com on your iPhone or iPad via the web

You can login to Outlook.com on your iPhone or iPad, the same as you can login to it on your Windows or Mac PC.

  1. Go to http://www.outlook.com
  2. Enter your Outlook.com email address and password.
  3. And you're in!
  4. If you'd rather use the full site than the stripped down mobile site, scroll down and tap on PC Site (why "PC Site" and not "Full Version"? Ask Microsoft!).

If you're on your iPhone, you'll get a warning saying you need to upgrade your browser to a newer version of Safari. Ignore than and tap on Continue. That's just poor interception (since you can't update iPhone Safari the way they imply.)

How to access Outlook.com on your iPhone or iPad via Mail

Better than the website, you can set up the built-in iPhone, iPod touch, or iPad Mail app to get your Outlook.com email.

  1. Launch the Settings app from your Home screen.
  2. Scroll down and tap on Mail, Contacts, and Calendars.
  3. Tap on Add Account.
  4. Tap on Hotmail.
  5. Enter your Outlook.com email address and password.
  6. Select what you want to Sync.

And you're done! You will miss out on any web-specific features, which are what Microsoft is working to make all shiny and revolutionary, but you will get all your mail in the unified inbox, right beside iCloud and Gmail if you use those services as well.

Note: You can also set up Outlook.com as Exchange ActiveSync. Just follow the same steps above but choose the Exchange button and use m.hotmail.com as your server.

If you need any extra help, jump into the Outlook.com setup thread in our iOS 5 Forum.



Digg v1 for iPhone hits the App Store

Posted: 31 Jul 2012 06:28 PM PDT

Digg v1 for iPhone hits the App Store

Digg is back! They've started from scratch, converted into a "startup", and v1 has now hit the web. Alongside the new and improved digg.com comes an updated Digg iPhone app (which is, ironically, version 3.0). For those who are not familiar with Digg, it's a website that "delivers the most interesting and talked about stories on the Internet right now."

The new Digg app is actually very nice. It's a simple vertically scrolling app that shows the titles of articles and the main images associated with them. It has a very clean and clutter-free design and runs great (although I'm hearing reports of the app crashing for many people). Tapping on an article will display it nicely in the built in browser.

Now here comes the not-so-good "feature" of Digg -- in order to login, you must login with Facebook. Now, it's not required to login to consume content from Digg, but if you want to "digg" an article (thumbs up), bookmark an article, or use services like Instapaper, Pocket, or Bitly, you are required to login with Facebook.

The good

  • Clean and clutter free
  • Great way to find good content to read
  • Instapaper, Pocket, and Bitly support

The bad

  • Must login with Facebook to use any of the features

The conclusion

The new Digg v1 iPhone app is well designed and a great way to discover popular articles on the web. If it wasn't for the requirement to login to Facebook, I'd be inclined to say that Digg's re-launch is off to a great start.

Free - Download Now



TruGlide Duo Stylus Pen review

Posted: 31 Jul 2012 05:43 PM PDT

If you're LYNKtec, how do you follow up the incredibly well received TruGlide Stylus for iPad? If you answered with a TruGlide Duo Stylus Pen, then you're absolutely right. The TruGlide Duo Stylus Pen takes everything that was great about the original, and doubles the functionality by adding a traditional ink pen to the new fangled capacitive pen. And it does it with balance and style.

First, I just have to say that the box the TruGlide Duo Stylus Pen comes in is really nice. Sure, it looks a bit like Dracula's coffin, but I'm absolutely going to keep it to store earrings in.

As with the original TruGlide Stylu, the TruGlide Duo Stylus Pen uses woven capacitive fibers making for a very different feel than regular stylus pens -- stronger, more durable, and not as mushy. I've already gone on at length about it in my original TruGlide review, and much of that applies for this new model as well.

I'll explain -- no, no, there is to much -- I'll sum up. The capacitance is very good, and remains one of the best I've tested. But... this one has a slightly crunchy sound when you press down on it. I can't really explain it. It's just... crunchy. Watch the video, you'll hear it.

The new news here is the traditional ink pen. And LINKtec certainly didn't cheap out here. The writing experience is great and the ink flow is smooth and consistent. There's a well constructed cap to keep the pen from leaking when not in use, and everything is just really well built and balanced. And even with all of that, the stylus and the pen, it remains exceptionally light.

The good

  • Durable woven tip
  • Good capacitance
  • Nice design
  • Includes traditional ink pen

The bad

  • Not as consistently precise as some other pro-level stylus

The conclusion

If you just want a stylus, the less expensive, single-porpose TruGlide, or one of the other pro-level stylus pens will serve you well. If you need a traditional pen as well as a stylus, however, the TruGlide Duo Stylus Pen is the way to go. It's my favorite combination stylus pen to date.

$39.95 Buy now



Remains of the Day: Splitsville

Posted: 31 Jul 2012 04:30 PM PDT

Remains of the Day: Splitsville One analyst thinks Apple might split its stock, The Daily splits up with some of its staff, and a writer suggests a few companies with which Apple might want to share a banana split.

Cool Things: The Most Versatile Stand for iPad 3

Posted: 31 Jul 2012 02:44 PM PDT

 

I've admitted here several times in the past that I'm a big fan of iPad stands. I've used a number of them and have several favorites that I've kept hold of. I have to say though, this HumanToolz Mobile Stand for iPad 3 looks superb, and like it could easily become my new favorite.

Right now it's a Kickstarter project and one that I think deserves to get funded. I'm impressed with a number of things about it, including:

– How genuinely mobile and versatile it is. The range of angles and positions you can use it in looks very impressive.

– How well it works in tandem with the iPad Smart Cover.

– I'm no hinge technology expert, but if it's the same tech used in the MacBook Air that's impressive too.

– It's lighter than the smart cover.

– The company behind it is based here in Texas.

Check out the intro video above and then take a look at the HumanToolz Stand Kickstarter project page.

I'm a backer and I'm really looking forward to seeing this stand in action with my iPad 3. Let me know in the comments what you think and if you decided to back the project.


© patrickj for iPad Insight, 2012. | Permalink | No comment | Add to del.icio.us
Post tags: , , ,

Microsoft goes gunning for Gmail with Outlook.com web-based email service

Posted: 31 Jul 2012 02:40 PM PDT

Microsoft goes gunning for Gmail with Outlook.com web-based email service

Microsoft has announced Outlook.com, a free, web-based email service that clearly has its sites set on Google's hugely popular Gmail service. Of course, Microsoft already has Hotmail, who's very name meant HTML mail (HoTMail), and live.com, but they've never been shy about multiple, seemingly redundant offerings. But this seems different. Rather than doubling up, Outlook.com seems to be a new layer -- a way to offer something new without forcing old users to just take it. According to the Office blog:

We think the time is right to reimagine email. So today, we're introducing a preview of Outlook.com. We realized that we needed to take a bold step, break from the past and build you a brand new service from the ground up. You already know Outlook via the Outlook desktop application-for PCs and Macs-as the world's most popular application for reading email, managing a calendar, and connecting to people. And you may have used the Outlook Web App connected to Exchange Server in your organization. Now, in addition to a desktop application and a service for businesses, we're offering Outlook as a personal email service - Outlook.com.

Microsoft is competing based on a few key features -- clean, informational dense, Metro-inspired design, social connectivity with Facebook, Twitter, LinkedIn, and Google, (with Skype to follow), Office web-app integration, NO ADS, and, of course, and easy way to move your existing mail over, should you choose to do so. And they'll even give you 7GB of SkyDrive storage for your attachment pleasure.

I've been trying it out for most of the day and it certainly is clean and Metro-esque, though more in the way Office 2013 is Metro-esque than Windows Phone is -- existing paradigms with flat color and lots of white space. Still, with frequent Google and Gmail mentions, and a couple YouTube embeds (see below), Microsoft is certainly being open and embracing.

That's smart.

If you want to try it out, head on over to Outlook.com and sign in with your existing Microsoft account, or create a new email address. (Act quickly if you're using the latter option -- screen names go fast!).

If you want to set it up on your iPhone or iPad, simply jump into Settings, Mail, Hotmail, and add your Outlook.com email address and password, and you're good to go.

Based on my experience so far, Outlook.com is really solid. I won't be abandoning iCloud or Gmail any time soon. How about you?

Source: Office blog via WPCentral



Verizon Wireless to pay fine for allegedly blocking tethering apps

Posted: 31 Jul 2012 02:35 PM PDT

Verizon Wireless to pay fine for allegedly blocking tethering apps Verizon Wireless has agreed to pay $1.25 million to the U.S. Federal Communications Commission to resolve a complaint that it blocked third-party tethering applications on Android phones, the FCC said Tuesday.

TechHive: Amazon enhances Cloud Player, takes on iTunes Match

Posted: 31 Jul 2012 02:15 PM PDT

TechHive: Amazon enhances Cloud Player, takes on iTunes Match Amazon has made some sweeping changes to its Cloud Player service, and in the process taken direct aim at Apple's iTunes Match.

Bing lets you ask your Facebook friends as you search

Posted: 31 Jul 2012 02:00 PM PDT

Bing lets you ask your Facebook friends as you search Microsoft announced Monday that when users do a search, they can tag their Facebook friends by name and get their recommendations on the search.

How to fix a stuck or broken On/Off button on a GSM/AT&T iPhone 4

Posted: 31 Jul 2012 01:25 PM PDT

How to DIY fix a stuck or broken power button on a GSM/AT&T iPhone 4

If you have a GSM/AT&T iPhone 4 with a On/Off button that's stuck, broken, collapsed, or otherwise non-functional, and you don't have AppleCare or a warranty to help you, don't worry -- a DIY repair can fix the issue and have you happily sleeping or waking your iPhone 4 again in no type, if you're game to give it a try.

Disclaimer: As with any repair, neither iMore nor PXLFIX can be held responsible for any damage you may do to your device. It's also worth considering that opening up your device to perform any repair or modification can and will void your Apple warranty. If you don't feel comfortable opening your device, don't. Use extreme care and caution when performing a repair on any device.

Note: While this repair will fix the On/Off button, if you're having issues with the noise canceling mic, proximity sensor, or ambient light sensor, it will also take care of those issues as well. This is the right guide if you're experiencing any of these issues as well.

What you need for a DIY GSM iPhone 4 On/Off button repair

PXLFIX recommends using only quality and genuine parts from a reputable supplier like eTech Parts. They have quality parts, tools, and much more for all your repair needs. You will find links to the specific parts you'll need for this repair in the list below.

Pro Tip:While the cable is most likely the issue in most situations, I'd highly recommend replacing both the flex cable and the bracket at the same time to rule out both issues. Of course, it's up to you.

  • GSM iPhone 4 (please note there ARE internal differences between the GSM and CDMA models)
  • Replacement GSM iPhone power button flex - Link to part
  • Replacement GSM iPhone power button bracket - Link to part

You will also need the following tools which are also available via eTech Parts.

  • SIM removal tool (or a paper clip)
  • #00 Phillips screwdriver
  • Pry tool or spudger
  • Tweezers
  • Security screwdriver (only if your iPhone has 5-point security screws in the dock connector)

Power off your iPhone 4

iPhone slide to power off

Before performing any repair, always power off your device before removing any screws or parts.

Remove the back

    Remove the dock connector screws on your CDMA iPhone 4
  1. First remove the bottom 2 dock connector screws in your iPhone 4. Use either your #00 screwdriver or the five point depending on whether or not your iPhone 4 has security screws in the dock connector. Almost all newer devices will have security screws.
  2. Remove the back of your CDMA iPhone 4
  3. To remove the back simply slide the back upwards and lift it off gently.
  4. Set the back and 2 dock connector screws aside.

Remove your SIM card

Use a SIM removal tool or a paperclip to remove your SIM card and tray. Set them aside.

Remove the battery

    Remove battery screw iPhone 4 CDMA
  1. To remove the battery you'll need to remove the #00 screw holding the battery clip in place. Remove this screw located to the bottom left of the battery.
  2. Remove battery clip iPhone 4 CDMA
  3. The metal clip on the battery is what clips the battery to the logic board. You'll need to pop this clip up with your plastic pry tool. Simply stick the end of your pry tool underneath the clip and gently pull upwards until it unfastens from the logic board.
  4. Remove battery iPhone 4 CDMA
  5. To remove the battery, I do not recommend using the plastic pull tab. There is quite a bit of adhesive underneath the battery and the tab will normally just rip off or you can bend the battery. Instead, run your pry tool along the right side of the battery and break the adhesive that way. Once the battery is free from the adhesive, you can pull the battery out of the phone. There are no other connectors holding it in.
  6. Fold over battery tab on iPhone 4
  7. You will notice a tiny grounding clip sitting underneath where you unscrewed the battery. Set this aside for replacement during reassembly. This is a grounding clip for your antenna. Make sure you put it back in place before reconnecting your battery.

Remove the Dock connector shield and disconnect the cable

    Remove dock connector shield iPhone 4 CDMA
  1. There is a shield held on with two screws covering the dock connector cable. Remove the two screws holding it in place and set the shield and screws aside, remembering where they came from.
  2. Remove dock connector cable iPhone 4 CDMA
  3. Next, use your pry tool to pry up the actual dock connector cable. Be careful as there is adhesive holding the cable in place as well. Peel back the adhesive gently to free the cable.

Remove the top logic board shield

  1. There are 5 screws holding the logic board shield in place. Remove the 5 screws holding it in place. Just be sure to remember which holes they came out of as the screws are different sizes. I always keep them in order of how they came out.
  2. Next you'll need to remove the shield. There is a tiny clip built into the shield holding it in place. (Refer to the photo above.) Pop it up with your pry tool and you should be able to slide the shield up fairly easily. Just take care not to bend it or break off a clip.

Disconnect the 6 cables from the top of the logic board

  1. There is only one connector holding the camera to the logic board. Remove this cable in the picture above using your pry tool. Gently lift upwards and it will pop right off.
  2. Next gently lift the camera out of the device. You'll notice there is a tiny tab that is seated underneath the LCD and digitizer cables to the right.
  3. Next pop up the LCD and digitizer cables to the right of where the camera cable was connected. You pop them up in the same direction.
  4. The 3 cables further to the right will need to be disconnected as well. They pop up in the opposite direction.

Disconnect the cellular antenna

iPhone-4-GSM-cellular-antenna-removal

To disconnect the cellular antenna, just pop the round cable up from the logic board holding it in place. It is connected to the speaker housing so just leave it where it is for now.

Remove the logic board

    iPhone-4-remove-logic-board-screws
  1. Start with the 2 screws holding the logic board down in the middle and at the bottom left. Both use your #00 Phillips screwdriver. They are the same size. The one on the right of the logic board in the middle of the device has a water sensor over it you'll need to remove.
  2. The second screw is located where the logic board meets the speaker assembly towards the bottom left of the device.
  3. The third and final screw holding the logic board in is located at the top of the logic board off to the right. It is the only cross-head screw in your device. Use a small flathead screwdriver to carefully remove it.
  4. iPhone-4-GSM-logic-board-removal
  5. You should now be able to remove your logic board. Holding it at the bottom, gently pull it upwards. I use my other hand to lift up at the top where the rear facing camera used to be.
  6. Logic board grounding clip iPhone 4 CDMA
  7. Take note that there is a small rubber piece that sits at the top of the logic board. You will need this for re-assembly so make sure it doesn't fall off. If you lose this, you could see reception issues.

Remove the vibrator assembly

  1. Locate your vibrator assembly in the upper right hand corner of your iPhone 4 (assuming you're looking at it from the back).
  2. It is held in with two screws. Use your #00 Phillips screwdriver and remove them. The screw on the left will be significantly longer. Just remember which screw came from where.
  3. Next, gently lift the vibrator assembly out of the device.

Remove the metal retainer & front facing camera

How-to-remove-iPhone-4-camera-retainer

There is a metal retainer covering the front facing camera. To remove it use your pry tool to gently pull it off. Make sure you don't lose it as you'll need it for reassembly. Now that the metal retainer has been removed you can gently lift the front facing camera out of the iPhone 4. Set it aside for reassembly later.

Remove the earpiece assembly

  1. Carefully use your pry tool to pull up the earpiece assembly from the midframe. It is held in with a foam type of adhesive.
  2. Remove iPhone 4 earpiece speaker
  3. Once you've remove the earpiece assembly, set it aside for reassembly.
  4. iPhone 4 earpiece assembly closeup

Remove the 2 screws in the power button bracket

iPhone 4 power button bracket 2 screws

The power button is held in by a bracket that runs along the top inside of the mid-frame There are 2 screws holding it in place. You may need to use your free hand to hold back the digitizer and LCD cables when removing the screw on the right side. Remove the two screws outlined in the picture above and set them aside.

Partially remove the power button bracket

  1. Use your pry tool to gently lift the power button bracket out of the iPhone but don't pull it up too high as it is still attached to the main assembly.
  2. iPhone 4 power button bracket removal
  3. You will notice that the cable is wrapped around the bracket. Gently unwrap it until you get to the position in the image below.
  4. iPhone 4 power button bracket unwinding
  5. Leave the power button bracket as it is for now and continue on to the next step.

Remove the power button

iPhone 4 physical power button

More than likely, the power button will start to come out of the iPhone as there is nothing holding it in place. Just remove it from the assembly and set it aside for reassembly as a precaution so it doesn't fall out and get lost.

Lift out the headphone jack assembly

Part of the power button cable is held in place behind the headphone jack assembly. In order to get to it we will need to partially remove the headphone jack assembly.

  1. Use a pair of tweezers or hemostats to gently pull the headphone jack assembly up and out of the device being careful not to pull it all the way.
  2. Partially remove iPhone 4 headphone jack assembly
  3. There is still a cable attached so folding the headphone jack assembly down and out of the way will be just fine and allow you access to where you need to get.
  4. Fold back iPhone 4 headphone jack assembly

Remove the power button flex cable and bracket from your iPhone

  1. Starting where the earpiece was you will notice that the power button flex cable is held down to the frame with adhesive. Gently start peeling it off being careful not to rip it.
  2. Peel up iPhone 4 power button and sensor cable
  3. Notice that the noise canceling mic part of the assembly is also held to the side of the frame with adhesive so be sure to peel it up carefully.
  4. The power button flex cable and bracket should now be free from the iPhone.
  5. iPhone 4 power button and sensor cable removed completely

Replace the old cable and bracket with the new one

Place new power button cable onto existing bracket

This part can be a bit tricky as you may need to place some folds into the new cable. If you didn't opt for a new bracket, just peel the old cable off the bracket and place the new cable on it before proceeding making sure you are placing it in the correct direction.

  1. First, start with the noise canceling mic portion of the assembly and line it up correctly. Use your pry tool where you need to in order to fit the cable in any grooves to the left of the headphone jack that may be hard to reach with your fingers.
  2. Position iPhone 4 power button cable in place
  3. Push the cable down where the earpiece assembly will be placed over it and wind the cable around the bracket like it was before unwinding it when removing the bracket.
  4. Leave the assembly where it's at and continue to the next step.

Replace the headphone jack

iPhone 4 replace headphone jack

Line up the headphone jack and push it back into the assembly as it was before making sure that the adhesive that sits underneath the vibrator assembly is pushed down again as well.

Replace the earpiece assembly

iPhone 4 replace earpiece speaker

Simply stick the earpiece assembly back into place. If you need to, feel free to use a bit of double sided adhesive tape if the adhesive is a bit worn after removing it.

Replace the power button

iPhone 4 physical power button

Now place the actual power button back into the assembly and use the edge of your pry tool or tweezers to make sure it is all the way into the opening before proceeding.

Secure the power button bracket back into place

  1. Place the power button bracket back into place. First, make sure that the right side of the bracket is flush with the metal part of the frame that holds it into place. If it isn't the power button bracket will not work as a lever as it should. Look at the picture below to know what metal retainer I am referring to.
  2. Make sure iPhone 4 power button bracket is seated correctly
  3. Now line the left part of the bracket up with the screw holes and replace the two screws that hold it in place. Again, use your free hand to hold back the digitizer and LCD cables.
  4. iPhone 4 remove power button bracket screws

This is a good time to test the power button and make sure it depresses correctly. If it does, continue on. If it doesn't, make sure everything is lined up correctly and that the bracket is seated how it should be. If not, remove the cable and position it again.

Replace the front facing camera & metal retainer

remove-iPhone-4-front-facing-camera

Now replace the front facing camera with the new replacement part. Once it is securely in place you can replace the metal retainer by snapping it back in place.

Reassemble the rest of your iPhone 4

Once you've gotten the power button situated and in working order, you can reassemble the rest of your iPhone 4. To do so you can either follow the directions above in exact reverse order starting with the vibrator assembly or you can watch the above video for reassembly instructions.

The video above is a complete reassembly so considering the repair you just performed, you can forward to about 4:20 and follow along from that point to completion.

And... done!

Once you've gotten your iPhone 4 completely put back together again you can go ahead and power it on. If all went well you should once again have a working iPhone 4 power button that provides good feedback when pushing the button.

Want to know how to perform another type of iPhone repair or modification? Send me suggestions to ally.kazmucha@imore.com.

For questions or to inquire about mail-in repairs through PXLFIX, please follow us on Twitter, like us on Facebook or e-mail us directly! Of course, you can like us and follow us just because you think we're cool too!

Additional Resources:



Gmail for iPhone now allows users to save picture attachments

Posted: 31 Jul 2012 12:34 PM PDT

The Gmail for iPhone app received an update today that includes the long awaited ability to save picture attachments to your Camera Roll. It has also received performance enhancements that improve the animation and scrolling experience.

Personally, I don't use the Gmail app, so when I read that this update now lets you tap and hold a photo attachment to save it to your Camera Roll, I couldn't help but let out a little chuckle. This is a feature that has been standard in most apps for a very long time. To think that a mail client was lacking this ability until today is laughable.

Do you use the Gmail app for iPhone? If so, why? What makes it better than Apple's native Mail app?

Free - Download Now



Obama vs. Romney go app vs. app on iPhone

Posted: 31 Jul 2012 12:27 PM PDT

Obama vs. Romney go app vs. app on iPhone

The U.S. presidential election is going mobile, with both Democratic President Barak Obama and Republican challenger Mitt Romney fielding iPhone apps this week to inform their respective bases and, dare we hope, the greater electorate. They're two very different apps from two very different parties and candidates, so let's take a look at them both...

The Democrat's app is Obama for America, and focuses on campaign messaging.

We're building this campaign from the ground up, and the Obama 2012 app has all the tools you need to join the fight to move the country forward:

The Republican's app is Mitt's VP, and focuses on who'll be chosen as running mate. (And is also available for Android.)

It's a question everyone's asking: who will be Mitt Romney's VP? There's no telling when that answer might come. But when it does, be the first to find out and access exclusive content with the Mitt's VP app.

Now I'm Canadian, where we have 238 parties, a non-elected senate, and no direct way to choose the leader of our country (the majority leader runs the place), so I have no candidate in this race. Still, I'm happy to see something as important as a national election embracing technology and mobile, and understanding the importance of reaching out to the type of people who use apps, read iMore and Mobile Nations, and regardless of political leanings, will help shape the future.

So whether you're passionate or pragmatic, you country is getting ready to call on your vote, so here's hoping everyone downloads both apps (and all apps associated with the campaigns), carefully scrutinizes both candidates across the full range of issues, and makes whatever Hobson's choice they ultimately feel is best for them and for America. (Aside from drafting Tim Cook, of course...)

Go get 'em.

Free - Download Obama for America

Free - Download Mitt's VP



Crucial unveils bargain SSDs for older laptops

Posted: 31 Jul 2012 12:30 PM PDT

Crucial unveils bargain SSDs for older laptops Crucial today announced a new solid-state drive (SSD) targeted at users who want to upgrade older computer systems with a flash drive that boasts a price well under $1 per gigabyte of capacity.

HipGeo adds video support to iOS travel journal app

Posted: 31 Jul 2012 11:55 AM PDT

HipGeo adds video support to iOS travel journal app An update Tuesday to the HipGeo travel journal app adds the ability to record and upload geo-aware videos of your travels. Philip Michaels takes the updated app out for a test drive.

Review: Vizio M3D470KD a superb sub-$1000 HDTV

Posted: 31 Jul 2012 10:45 AM PDT

Review: Vizio M3D470KD a superb sub-$1000 HDTV The 47-inch M3D470KD offers impressive images, streaming options, and a remote with a keyboard, all for a low $900 street price. Vizio cut corners in the speakers and multimedia offerings, which may not matter much.

Apple v. Samsung: How it was explained to the jury

Posted: 31 Jul 2012 09:45 AM PDT

Apple v. Samsung: How it was explained to the jury The 10 California jurors who will decide the rights and wrongs in the battle between Apple and Samsung were sworn in late Monday and alongside instructions on...

Weather HD 2 for iPad Released – Gorgeous Weather App Adds Impressive New Features

Posted: 31 Jul 2012 09:29 AM PDT

Weather HD 2 for iPad

Weather HD 2 for the iPad and iPhone has been released on the App Store today. This is a huge update to the already outstanding Weather HD app. Or, as its developers say, a brand new ground-breaking release. Bringing amazing new design and revolutionary new features.

The new Version is 2.0.0 for those  scoring at home, and it really is packed with great new features. This has been my favorite iPad weather app ever since it first hit the App Store back in 2010. It has always boasted a beautiful, simple UI and striking video imagery, and was a repeat selection in our list of Best iPad Apps of 2011.

Here's the change list for this huge update:
● New stunning weather animations.
● 3D Weather Maps, like you have never seen before.
● QuickView to see the weather at multiple locations at once.
● Severe Alerts with Push Notifications (USA & Europe).
● Social: see your friends' weather and share yours.
● MultiForecast: add Accuweather & MeteoGroup with in-app purchase.

(...)
Read the rest of Weather HD 2 for iPad Released – Gorgeous Weather App Adds Impressive New Features (414 words)


© patrickj for iPad Insight, 2012. | Permalink | No comment | Add to del.icio.us
Post tags: , ,

No hay comentarios:

Publicar un comentario